Tel:+86 021-68911957 |

Industry News

position:home > Industry News >

jaw plate fixed crusher spares

Jaw crusher is one of the main crushers used in mining, quarry and ore processing plants. The jaw crusher reduces the size of large rocks and ore through compression. The rock remains in the jaw of the crusher until the rock is small enough to pass through the gap to the bottom of the jaw.

jaw crusher
 
We can also manufacture crusher parts for customers. If you need spare parts for crushers or screening machines, we have a large number of jaw plate fixed crusher spares for you to choose from.
 
Jaw plate fixed crusher spares products contain 14%, 18% and 20% manganese and 2% chromium. Commonly used profiles include "high teeth" for recycling, "square teeth" for hard rock and standard crushing "Ripple" applied. Other high turnover items include liners, washers, brackets, toggle hammers and brackets. All jaw plates and replacement parts can be delivered worldwide. Choose the jaw plate that best suits your jaw crusher. If you know the serial number of the jaw to be replaced, just use the search function on our website to search.
 
Jaw plate
 

jaw plate fixed crusher spares


 
The working part of the jaw crusher is two jaws, one is a fixed jaw (fixed jaw), which is vertically (or slightly inclined at the upper end) fixed on the front wall of the machine body, and the other is a movable jaw (moving jaw). ), the position is inclined, and the fixed jaw plate forms a large and small crushing cavity (working cavity). The movable jaw plate cyclically reciprocates against the fixed jaw plate, sometimes separating and sometimes approaching. When separated, the material enters the crushing cavity, and the finished product is discharged from the lower part; when it is close, the material installed between the two jaws is crushed by squeezing, bending and splitting. The movable jaws periodically reciprocate, and the sand making machine crushes the materials entering between the two jaws.

jaw plate fixed crusher spares: side guard
 
Side guards aliases: guards, side guards, upper guards, lower guards, peripheral guards, fork plates
 
 
Side guard plate introduction: The crusher’s side guard plate includes the upper guard plate and the lower guard plate, both of which are right-angled trapezoid plates. The slopes of the hypotenuses of the lower guard plate are the same. The upper guard plate and the lower guard plate are provided with two outwardly protruding limit blocks integrally molded with the board on the middle surface of the upper guard plate and the upper guard plate is provided with mounting holes , One of the right angles of the upper side guard plate is designed as an arc transition, and the upper side guard plate and the lower side guard plate are provided with grooves close to the edge along the hypotenuse and the vertical side. The utility model has the advantages of simple structure, convenient installation and debugging, excellent tensile strength and toughness, and will not deform when subjected to a large impact force, effectively ensuring the safety of the crusher, and the production cost of the utility model Low, suitable for mass production.
 
jaw plate fixed crusher spares: toggle plate
 
Toggle aliases: toggle plate, elbow pad, toggle head, front elbow pad, rear elbow pad, S plate, thrust plate, front thrust plate, rear thrust plate, wave plate

Toggle introduction: The toggle plate of the jaw crusher (or the toggle plate of the jaw crusher) is an accurately calculated cast iron piece used to adjust the size of the discharge opening and compensate for the wear between the jaw plate, the toggle plate and the toggle pad mechanism. It is not only a force transmission component, but also a safety part of the crusher. When the unbreakable material falls into the crusher and the machine exceeds the normal load, the toggle plate is immediately broken and the crusher stops working, thereby avoiding damage to the entire machine. The toggle plate and toggle plate pad use rolling contact, and there is little friction under normal use, and only a layer of grease is applied to the contact surface. The whole part is a mechanism used to adjust the size of the discharge opening and compensate the wear between the jaw plate, the toggle plate and the toggle pad

Contact Info

If you have any questions about our ore machinery equipment, please contact us.

Office Add: NO.1188,Fengliang Road,Fengcheng Town,Fengxian District,Shanghai,China

tel:+86 21-68911957

email crusher price
Related Equipment